8 DIY Christmas Bauble designs

STEP ONE

Fill a container with water deep enough to submerge the baubles.
Pour in your chosen nail polish colours for marble I used grey, black metallic and silver.

STEP TWO

Swirl the colours gently using a stick.

Attach your bauble to a stick

STEP THREE

Dip the bauble into the water turning it to get the nail polish to stick all over.

Hang up to dry.

STEP ONE

Choose a plain bauble and type of wool.
You'll also need a glue gun.

STEP TWO

Start at the top and apply glue the bauble and stick down the end of the wool.
Start to wrap round the bauble gluing a small line at a time.

STEP THREE

Wrap and glue around the bauble till you reach the bottom.
Snip off the end and glue down.

STEP ONE

Using washi or masking tape, tape your design out.

STEP TWO

Paint with gold paint.
Whilst still wet sprinkle with glitter.

STEP THREE

Once dry peel off the masking tape.
Clean up edges by scraping off paint with knife.

STEP ONE

Using glue gun apply a dot of glue and press on multi coloured pom poms

STEP TWO

Alternate the placement and colours of poms poms 

STEP THREE

Glue poms poms on till there are no gaps left.

STEP ONE

Chop down craft feathers to shorter length.
Start glueing them around the bauble starting half way down.

STEP TWO

Then glue a row of feathers above with ends tucked into bauble cap.

STEP THREE

Finish off top and hide feather ends by gluing pearl or jewels around the cap.

STEP ONE

Paint plain baubles with matte black paint.

I used a tester pot.

STEP TWO

Hang them up to dry

Apply a second coat if needed.

STEP THREE

Draw your design using a white chalk pen or white paint.
( I couldn't find mine so used a grout pen!!)

STEP ONE

Use any empty bauble you have from gifts etc

Fill with your chosen item I used gold painted leaves.

STEP TWO

Sprinkle inside some glitter.

Close the bauble up.

STEP THREE

Shake to distribute the glitter.

Add ribbon to match the contents.